This Hero’s Engine demonstrates
the earliest form of steam engine described by Hero of Alexandria about A.D.
100.
 |
A 125 mL flask with two side nozzles bent at 90¡ angles, containing a
small amount of water, is suspended by a chain over a flame.
The
steam
produced is ejected from the nozzles causing the flask to rotate.
Complete with chain and rubber stopper.
WW6206400 Steam Engine
your cost $ 42.95
|
| |
|
Electric
Generator Motor
ready to use
|
This belt-driven generator may be used with
this
Steam Engine (63030-00 ).
Operating at approximately 1500 rpm, the
generator will produce enough electricity to light the included 3.8 volt
bulb.
The unit is mounted on a metal base (7.6 cm x 11.4 cm) and has a
V-grooved
pulley for the drive belt.
# 65402-00
your cost
$115.95
|
| |
|
Steam Engine #60
 |
This
model steam engine comes mounted on a 15 x 20 cm
metal base
Includes: a water gauge safety valve, whistle, and
throttle.
The steam engine can be used to power our electric generator
(65402-00). 120V, AC
Dry Fuel Heated Solid brass and nickel plated
Steam
Engine - perfect if you are involved in School Science Fairs, Scouting
Merit
Badge projects or just interested in learning more about mechanical
energy and
motion and the way things work.
The fully-assembled Steam Engine
#60 is
equipped with seamless brass silver soldered boilers, deluxe 3" power
take off
flywheel, safety valve, whistle & throttle valve, nickel plated
finish
engine and boiler, water level guage, custom lube oil, filling funnel,
dry fuel
for 1 hour running time (except electrics) and operator's manual.
This
is a great first engine! Includes pop valve, whistle and
throttle.
#
WW6096200
your cost
$165.00
# WW6002900 Tablets, Dry Fuel,
Esbit $16.95
|
| |
|
Brass parts are
lacquered to reduce
discoloration
or
oxidation
 | Engine equipped with
reversible brass cylinder and piston, safety valve, and a real working steam
whistle, centrifugal governor, steam jet oil lubrication and brass boiler.
Operates for approx. 15 minutes per fueling.
Flywheel shaft has a
grooved pulley to run additional Wilesco accessories
Unique piece for
hobbyist or collector.
This steam model will give pleasure to young and
old
alike and will be treasured for life.
Measures 10 1/4´´L x 8
1/2´´W x 10´´H (including smoke stack).
Discount Special $ 329.- |
| | |
 | This new beautifully
detailed steam engine is the latest and smallest engine made by Wilesco.
It
is made of printed sheet steel and has a brass boiler and oscillating brass
cylinder and piston.
Also has grooved pulley, safety valve and sight
glass.
Measures 6 1/4” L x 4 7/8” W x 7” H.
Discount Special $ 99.- |
