|
BEST
LINKS BLACK LIST |
We use and are Distributor for ATK table set by engines sizes and after by year |
![]() Metric Drills Steel Stamps tool OBD code reader |
| Rebuilt engines for CHEVROLET
automobiles 350 cubic" / 5.7-liter only
100% Hot Run PowerTested Each ATK/VEGE PowerTest engine is hot run tested under its own power for a minimum of 30 minutes. engines sizes from 307 / 5.0 liter thru 350 / 5.7 liter click here engines sizes from 366 / 5.9 liter thru 454 / 7.4 liter click here
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Model - Cubic inches | Cyl | Year | VIN | Description | eng# | head# | your cost | |
| +core | ||||||||
| Chevy engines | 350 / 5.7 | V8 | 1964 1967 |
H,J,K,L,X,4,8 | Powertest-Powertest-2
bolts main 6 exhaust manifold bolts on passenger side head driver side dipstick |
DC08 | 2C17 | 1,395 +250 |
| 350 / 5.7 | V8 | 1964 1977 | H,J,K,L,X,4,8 | Powertest-4 bolt main - 9.1:1
compression driver side dipstick | DC42 | 2C17 | 1,600 +285 | |
| 350 / 5.7 | V8 | 1964 1977 | H,J,K,L,X,4,8 | Powertest-4 bolt main 6 exhaust manifold bolts on passenger side | DC09 | 2C17 | 1,395 +285 | |
| 350 / 5.7 | V8 | 1968 1979 | H,J,K,L,X,4,8 | Powertest-4 bolt main-1 ton&
up truck driver side dipstick 7/16" bolt on front of heads | DC87 | 2C87 | 1,599 +285 | |
| 350 / 5.7 | V8 | 1978 1980 | H,J,K,L,X,4,8 | 2 bolts-driver side dipstick 7 exhaust manifold bolt on passenger side head | DC13 | 2C11 R 2C17 L | 1,395 +250 | |
| Chevy engines | 350 / 5.7 | V8 | 1978 1980 | H,J,K,L,X,4,8 | 4 bolt main-driver side
dipstick 7 exhaust manifold bolt on passenger side head | DC15 | 2C11 R 2C17 L | 1,395 +285 |
| 350 / 5.7 | V8 | 1978 1985 | L,M,P,6,8 | Powertest-2 bolts main passenger side dipstick 7 exhaust manifold bolt on passenger side head | DC11 | 2C11
R 2C17 L | 1,395 +250 | |
| 350 / 5.7 | V8 | 1979 1985 | L,M,P,6,8 | 4
bolt main-trucks up to 1 ton passenger side dipstick 7 exhaust manifold bolt on passenger side head | DC12 | 2C11 R 2C17 L | 1,395 +285 | |
| 350 / 5.7 | V8 | 1979 1985 | L,M,P,6,8 | 4 bolt main-trucks up to 1
ton passenger side dipstick 7/16" bolt on front of head 6 exhaust manifold bolt on passenger side head | DC54 | 2C11 R 2C17 L | 1,595 +285 | |
| 350 / 5.7 | V8 | 1986 | L,M,P,6,8 | 2 bolt main-non roller | DC96 | 2C11 R 2C17 L | 1,650 +385 | |
| block#548 | ||||||||
| 350 / 5.7 | V8 | 1986 1987 | L,M,P,6,8 | 4
bolt main-full crcle main seal-non roller cam valve cover bolts around outside edge of cover for trucks up to 1 ton | DC03 | 2C11 R 2C17 L | 1,595 +435 | |
| block#548 - head# 261 | ||||||||
| Chevy engines | 350 / 5.7 | V8 | 1986 1989 | L,M | 4 bolt
main-non roller-7/16" bolt on front of head for trucks up to 1 ton | DCB2 | 2CB2 | 1,695 +435 |
| block#638-548 - head# 267 | ||||||||
| 350 / 5.7 | V8 | 1987 1994 | K,L,M | carburated-2 bolt main-non roller cam center valve cover bolt for 93/95 see DCM6 | DCB1 | 2CA2 | ||
| block# 638 head# 191-193 | ||||||||
| Chevy engines over GVW | 350 / 5.7 | V8 | 1987 1995 | K,M | carburated
or FI-4 bolt main-non roller cam center valve cover bolts-over GVW- | DCA2 | 2CA2 | 1,695 +435 for HDE |
| block# 638-548-148 | ||||||||
| 350 / 5.7 | V8 | 1987 1995 | 7 | EFI-2 bolt
main-roller cam-center valve cover bolt will not fit = 93-up LT-1 or corvette | DCA3 | 2CA2 | 1,595 +385 | |
| block# 638-548-148 | ||||||||
| up to 8500 GVW | 350 / 5.7 | V8 | 1987 1995 | K,M | EFI only-4
bolt main-none roller center valve cover bolts | DCM5 | 2CA2 | 3,995 +0 for HDE |
| block# 638-548-148 | ||||||||
| 350 / 5.7 | V8 | 1987 1995 | K,M | EFI only-non roller-center valve covewr bolts | DCM6 | 2CA2 | 1,495 +385 | |
| block# 638 - head# 191-193 | ||||||||
| 350 / 5.7 | V8 | 1987 1992 | 8 | TPI-HO roller cam-2 bolt main | DCN7 | 2CN7 | 1,649 +385 | |
| block# 148-548-638 - head#
083-217 will not fit = aluminium head corvett "Y" body | ||||||||
| Chevy
engines Camaro Firebird | 350 / 5.7 | V8 | 1993 1994 | P | SFI-GEN II-LT-1-roller cam-aluminium head | DCM3 | 2CM3 | ? |
| block# 327 - head# 648 for 93/94 Camaro & Firebird | ||||||||
| 350 / 5.7 | V8 | 1994 1995 | P | FI-LT-1-roller cam-cast iron head | DCF8 | 2CF8 | 2,249 +460 | |
| block# 327 - head# 320 | ||||||||
| Chevy
engines Camaro Firebird | 350 / 5.7 | V8 | 1995 | P | SFI-Gen II -
LT-1 - HO-roller cam-aluminuim head no timing cover supplied-w/out crank trigger for 1995 Camaro & Firebird | DCR9 | 2CR9 | 2,295 +460 |
| block# 327 - head# 374 | ||||||||
| van | 350 / 5.7 | V8 | 1995 1996 | K | FI-non
roller cam-4 bolt main-7/16" bolt on front of heads-valve cover bolts around
edge of cover fits 96 Old "G" full size van | DCH2 | 2CH2 | 1,649 +435 |
| block# 880 - head# 898 | ||||||||
| 350 / 5.7 | V8 | 1996 | P | LT-1-roller cam-cast iron heads | DCT1 | 2CT1 | 2,595 +460 | |
| block# 327 - head# 290 | ||||||||
| Camaro Firebird | 350 / 5.7 | V8 | 1996 1997 | P | LT-1-roller
cam-aluminium heads crank trigger in timing cover for 96-98 Camaro & firebird | DCT2 | 2,595 +460 | |
| block# 327 - head# 649 | ||||||||
| Chevy engines up to 8500 GVW | 350 / 5.7 | V8 | 1996 2000 | R | FI-roller
cam-2 bolt main-center valve cover bolts p[lastic timing cover-w/crank sensor-Vortec head SAE bolts for motor mount / starter / bell housing | DCH4 | 2CH4 | 1,749 +385 |
| block# 880 - head# 906-062 | ||||||||
| over 8500 GVW | 350 / 5.7 | V8 | 1996 2000 | R | FI-roller
cam-4 bolt main-center valve cover bolts plastic timing cover-w/crank sensor-Vortec head SAE bolts for motor mount / starter / bell housing | DCM9 | 2CH4 | 1845 +435 for HDE |
| block# 880 - head# 906-062 | ||||||||
| over 8500 GVW | 350 / 5.7 | V8 | 2000 2002 | R | FI-roller
cam-4 bolt main-center valve cover bolts plastic timing cover-w/crank sensor-Vortec head Metric bolts for motor mount / starter / bell housing | DCFA | 2CH4 | ? |
| block# 880 - head# 906-062 | ||||||||
| Chevy engines up to 8500 GVW | 350 / 5.7 | V8 | 2000 2002 | R | FI-roller cam-2 bolt main-center valve cover
bolts plastic timing cover-w/crank sensor-Vortec head Metric bolts for motor mount / starter / bell housing | DCFC | 2CH4 | ? |
| block# 880 - head# 906-062 | ||||||||
| 350 / 5.7 | V8 | 1997 1998 | G | LS-1
engine for corvette "Y" body | DCV2 | ? | ||
| block# 12560626 - head3 241 | ||||||||
| Camaro Firebird | 350 / 5.7 | V8 | 1998 | G | LS-1 engine-fit Camaro & Firebird "F" body | DCV3 | ? | |
| block# 12560626 - head# 241 | ||||||||
| Corvette | 350 / 5.7 | V8 | 1999 2001 | G | LS-1 engine - for Corvette "Y" body | DCV4 | ? | |
| block# 12560626 | ||||||||
| Chevy
engines Camaro Firebird | 350 / 5.7 | V8 | 1999 2002 | G | LS-1 engine- for Camaro & Firebird "F" body | DCU9 | ? | |
| block# 12560626 - head# 241 | ||||||||
| for : 121cubic" /2.0 liter thru 151 cubic" /2.5 liter click here | for : 173 cubic" /2.8-liter thru 200 cubic" /3.3 liter click here |
| for : 204 cubic" / 3.3 liter thru 262 cubic" /4.3 liter click here | for: 264 cubic" /4.3 liter thru 327 cubic" /5.4 liter click here |
| for : 350 cubic" 5.7 liter only click here | for : 366 cubic" /6.0 liter thru 496 cubic" /8.1 liter click here |
|
| All trademarks belong
to their respective owners-the use of any name is intended to describe a classe or a type of automobile and parts and is not intended to indicate any association with said company. |
| Back to home page and the index page |
| About us What is "Core Charge" Refund policy Warranty what you will get with our rebuilt engines |