|
Model |
Year |
Procedure |
|
850,
S70,
V70,
S80 |
1996-97,
1998-00,
1999-00 |
Service reminder lamp must be reset with either a Scan
Tool Connected to the Data Link Connector (DLC), or connect a Volvo Rest Tool
to the DLC and press the button on the tool to reset. |
|
240 |
1986-93 |
When the "SERVICE" is illuminated, reach behind the
instrument panel and push the level located between the tachometer and
speedometer. |
|
740,780 |
1986-88,
1988-90 |
When the "SERVICE" light is illuminated, reach behind the
instrument panel and press the button located to the right of the
speedometer. |
|
740,
760,
850
w/ Yazaki Cluster*,
940,
960
|
1989-92,
1986-90,
1991-97 |
When the "SERVICE" light is illuminated, remove the cap on
the face of the instrument panel between the clock and the speedometer. Insert
a thin-bladed tool into the cavity and press the reset button.
*Odometer above the speedometer
needle. |
|
All Models |
1999 |
Press and hold trip odometer reset button. Next, turn the
ignition key to the run position KPII (not the start position). Wait 30 seconds
or until service light begins blinking. Turn the ignition to off position.
Release the Trip Odometer button. |
|
850
w/ VDO Cluster* |
All Years |
To reset the Service Reminder Indicator, turn the ignition
on while the engine is not running. Access the diagnostic unit located on the
left fender well under the hood. Connect the single wire plug to terminal #7.
Press the reset button four times shortly. When the LED glows, press the button
once. When the LED glows steadily again, press the button five times. When the
LED glows steadily again, press the button once. After the LED gives a couple
of rapid flashes, the system is reset. Unplug the connector and turn the
ignition off.
*Odometer located below the speedometer
needle. |
|
